Fence
Inspired by barbed-wire perimeter fences, the minimalist yet edgy Barbed-Wire Ring adds attitude to any look.
Materials:100% Recycled Stainless Steel. Unisex.
Free Standard Shipping (All Europe)
Average delivery time 7-12 working days.
You can find your estimated delivery time further in the checkout.
FREE EXPRESS SHIPPING FROM 100$
FEDEX & DHL
Average delivery time 2-6 working days.
You can find your estimated delivery time further in the checkout.
Returns are accepted on all of our physical products if they are sent back to us within 14 days after you have received the ordered item. See the return policy for further instructions on how to return your item, or send an e-mail to support@scadot.com for more information.
Ring size guide
IF YOU HAVE A PRINTER
- Right-click on the image above and select 'Save Image As.'
- Print the image at 100% scale (make sure scaling is turned off).
- Measure the gray bottom section - it should be 3.5 inches from end to end.
- Cut out the size guide (the upper part), and wrap the paper around the desired finger.
- The number that most closely matches 'Read Size Here' will be your size (Note: if you are in between two sizes, it is best to round up one size).
Ring size table
| Size | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
|---|---|---|---|---|---|---|---|---|---|---|
| Length (mm) | 47 | 49 | 52 | 55 | 57 | 60 | 62 | 65 | 67 | 70 |
Hvis du ikke har en printer
- Cut a thin strip of paper, approx. 10-12 cm long.
- Wrap the paper strip tightly around the desired finger.
- Use a pen or pencil to mark the point where the paper overlaps itself.
- Lay the paper strip on a flat surface and use a ruler to measure the distance from the end of the strip to the mark you made, in millimeters. This will give you a measurement of the circumference of your finger.
- Use the chart below to convert your measurement to our standard ring sizes.
- If you're two sizes up, it's always best to round up rather than down.
Bracelet size guide
All our bracelet sizes are listed with a measurement in inches.
Watch the video below and follow the steps to determine your size.
- Wrap a string around your wrist.
- Make sure you leave enough slack to allow the bracelet to move freely around the wrist.
- Pinch where the bracelet overlaps between two fingers and remove the string from your wrist.
- Continue to pinch the string at this point and place it on a flat surface. With the other hand, mark this point on the string using a pen.
- In inches, measure from the end of the string to the mark you made.
- Your size is the measurement in inches (ie a measurement of 7" means you should order a size 7). If you're two sizes up, it's always best to round up instead of down.
Necklace size guide
| Size (inch) | Length (cm) | Detail |
| 16'' | 40 | Loose but close to the neck |
| 18'' | 45 | Hangs at the collarbone |
| 20'' | 50 | Hangs past the collarbone |
| 22'' | 55 | Falls at the top of the chest |
| 24'' | 61 | Sits on the middle of the chest |
Use this image as an example.
Stores in our industry mark up their products 8-10 times the actual cost. We do things differently. To bring luxury within reach, SCADOT products are exclusive at www.scadot.com. This allows us to skip the retail markup and pass the savings directly to you.